Zaruma Drill Results

Tuesday, 25 March 2008 08:57 AM

 Zaruma Resources: New Copper Assays Continue to Expand Mineralization at Luz del Cobre

Toronto, Ontario, March 25, 2008; Zaruma Resources Inc., (TSX-ZMR) is pleased to report that new results from drilling in the vicinity of Luz del Cobre, located in the Company’s San Antonio project (Sonora, Mexico), continue to expand the copper mineralization of the Luz del Cobre ore body.

The first phase of the drill programme was completed in the Trion-Luz del Cobre area in December 2007, with very positive results on the southwest end of the Luz del Cobre ore body, and in a new discovery, Calvario, located roughly 200 metres to the northwest. A second phase of drilling to better define mineralization of the two areas began in January and was completed on February 28, 2008. Seven holes were drilled on the southwest end of Luz del Cobre and 22 holes at Calvario and between the two target areas, with a total of 2,996 metres drilled.   

On the southwest end of Luz del Cobre complete assay results are available for new holes LUZ-08-55 through LUZ-08-61. Additional assay results have also been received for the 2007 holes LUZ-07-51 through LUZ-07-54, reported on January 14, 2008, now extending the mineralized intervals. Drill results for the southwest extension of Luz del Cobre are:

 

Drill Section

Drill ID

From, m.

To, m.

True Width, m.

Copper

50 NW

LUZ-07-51*

50.4

72.85

18.45

0.79%

50 NW

LUZ-07-52*

45.8

75.83

30.03

0.63%

75 NW

LUZ-07-53*

58.8

67.06

8.26

0.99%

0 NW

LUZ-07-54

37.2

53.35

16.15

0.86%

50 NW

LUZ-08-55**

60.47

68

5.3

0.75%

50 NW

LUZ-08-56**

no significant results; northeast limit

 

0 NW

LUZ-08-57**

50.22

54.86

3.8

0.70%

0 NW

LUZ-08-58**

42.67

52.05

8.1

0.64%

25 NW

LUZ-08-59**

48.77

53.37

3.8

0.61%

25 SE

LUZ-08-60**

Abandoned in fault zone at 31 m.

 

100 NW

LUZ-08-61**

64.39

81.75

15.7

1.00%

*Indicates drill holes previously reported, with additional assay data

 

**Indicates angle drill holes, with drill section indicating collar location

 

 

The new results have demonstrated continuation of mineralization along a north-south fault bounded block from the southwest end of Luz del Cobre. The mineralization remains open to the south, with the southernmost drill line containing potentially mineable copper mineralization over a width of around 100 metres.

 

At the Calvario target, complete results have been received for the first four holes of the second phase of work, which, along with the previously reported holes and the visual identification of copper and partial assay results in many of the unreported holes, strongly suggests that Calvario has the potential to add to the Luz del Cobre mineable resources. It also appears that the mineralization from Calvario, subject to confirmation by drilling, could join with that at Luz del Cobre.

 

 

 

 

Available assay results from Calvario are as follows, with the Drill Section data the same as for Luz del Cobre and the number indicating the metres to the northwest of the 0 baseline.

 

 

Drill Section

Drill ID

From, m.

To, m.

True Width, m.

Copper

425 NW

LUZ-08-62

57.6

68.2

9.2

0.38%

450 NW

LUZ-08-63

no significant results

 

 

400 NW

LUZ-08-64

56.2

70.1

9.8

0.94%

400 NW

LUZ-08-65

36.85

73.15

31.4

0.61%

 

Assay results for the remaining drill holes at Calvario are expected shortly, and will be reported as soon as possible. With the new data, a revised resource estimate for Luz del Cobre is planned in the second quarter of the year. It is expected that this will increase the ore reserves to be processed by the Luz del Cobre plant, currently under construction, and will extend the life of the mine beyond the estimated five to six years in the 2006 feasibility study. Production is planned at 15 million pounds of cathode copper per year from an open pit mining, heap leach, solvent extraction, electro-winning operation.

 

The drill results have expanded the copper mineralization at Calvario, with the limits of the body still largely undefined. The near surface oxide and supergene sulphide copper mineralization appears to occur as a blanket-type body of varying thickness, with the body currently partially tested for about 200 metres along a northwesterly axis and an open ended width of at least 100 metres.

 

Drilling has stopped with the completion of this planned programme.  Additional drilling is anticipated in the fall, after the interpretation of all drill data, and will likely be done in conjunction with testing of additional exploration targets on the San Antonio property.

 

The drilling programme and evaluation is under the supervision of Geologist James E. Poulter, the “Qualified Person” as defined in NI 43-101, and is responsible for the technical information presented in this news release. Assays were prepared by Jacobs Assay Lab, Tucson, Arizona, from pulps prepared by Sonora Sample Preparations, Hermosillo, Mexico.

 

Zaruma Resources Inc. is listed on The Toronto and Frankfurt Stock Exchanges, (symbol: ZMR). Common shares outstanding: 115,937,247.

 

This News Release contains forward-looking statements which are typically preceded by, followed by or including the words “believes”, “expects”, “anticipates”, “estimates”, “intends”, “plans” or similar expressions. Forward-looking statements are not guarantees of future performance as they involve risks, uncertainties and assumptions, including securing additional funding to continue its development programmes.

 

 

For further information, please contact:

 

Zaruma Resources Inc.

20 Toronto Street, 12th Floor, Toronto ON, M5C 2B8, Canada

Fax: 416 367 3638, [email protected] , www.zaruma.com

 

Dr. Thomas Utter                                                                                               Frank van de Water

President and CEO                                                                                            CFO and Secretary

Tel.: 521 662 222 0063, 52 662 210 5650                                                 Tel.: 416 869 0772

[email protected]                                                                     [email protected]