Global Hunter samples up to 5.95% total Cu at Poderosa

Global Hunter samples up to 5.95% total Cu at Poderosa

Tuesday, 03 May 2011 07:08 PM

Vancouver, British Columbia, May 3, 2011 - Global Hunter Corp. (TSX.V: BOB) (“Global Hunter” or “the Company”) is pleased to announce further assay results from its previously announced surface sampling program. The results are encouraging with new gold showings as well as very positive copper oxide assays over wide-spread areas.


Highlights from the entire program
- 9 mineralized shear and/or alteration zones sampled
- total of 13.5 kilometres of strike length along know copper bearing shear and alteration zones tested with 205 rock chip samples
- Soluble copper values range up to 5.26% (median 0.45%, average 0.73%)
- Gold values range up to 1.16 g/t (median 0.04 g/t, average 0.12 g/t)
- Total copper values range up to 5.39% (median 0.70%, average 0.98%)

Results form individual shear zones sampled during this program are reported below:


La Poderosa
La Poderosa shear zone is located approximately 500 metres south of Las Posadas shear with an attitude of 320˚ with a general steep dip to the east. La Poderosa shear can be traced along strike for over 3 kilometres on surface.


A total of eighteen surface samples were collected in the northern portion of the shear zone over strike length of over 1,000 metres.
- Soluble copper assays ranged from 0.02 to 4.47% soluble Cu (median 1.42 and average 1.44% Cu Sol)
- Gold assays ranged from 0.01 to 1.14g/t (median 0.06 and average 0.25g/t)
- Total copper assays ranged from 0.03 to 5.95% total Cu (median 1.85 and average 1.85% Cu T)


Included in these eighteen samples were five samples collected in the extreme northwest portion of La Poderosa (Poderosa North) from an area 100 metres by 25 metres that returned:

- Soluble copper assays ranged from 1.45 to 4.47% soluble Cu (median 2.29 and average 2.58% Cu Sol)
- Gold assay values ranged from 0.44 to 0.88g/t (median 0.53 and average 0.59g/t)
- Total copper assays ranged from 2.15 to 5.95% total Cu (median 3.22 and average 3.61% Cu T)


The results of the surface sampling demonstrate excellent grades of soluble copper (oxide) are present within La Poderosa and have been traced for strike lengths of 1,000 metres on surface. The area of Poderosa North returned not only high soluble copper (oxide) assays but also very significant gold results with assays averaging over 0.5g/t Au.


The Company is planning a diamond-drilling program to test the continuity of copper and gold mineralization at depth and to determine the true widths of the mineralized shears.


A complete list of assays are available in the Appendix hereto or at the Company’s website www.globalhunter.ca


La Abesinia
La Abesinia shear zone parallels La Poderosa and is located 2 kilometres to the east and has been traced on surface for over 5 kilometres.

A total of 38 samples were collected from two areas, 33 from an area 1,200 metres along strike and five from an area 425 metres along strike located 4.5 kilometres southeast of the first area (Abesinia South).

The 33 samples returned
- Soluble copper assays ranged from 0.04 to 4.81% soluble Cu (median 0.85 and average 1.16% Cu Sol)
- Gold assay values ranging from 0.01 to 1.32g/t Au (median of 0.05 and average of 0.17g/t)
- Total copper assays ranged from 0.07 to 5.66% total Cu (median 1.19 and average 1.41% Cu T)


The 5 samples from Abensinia South returned:


- Total copper assays ranged from 0.98 to 1.33% total Cu (median 1.14 and average 1.13% Cu T)
- Soluble copper assays ranged from 0.09 to 1.15% soluble Cu (median 0.13 and average 0.33% Cu Sol)
- Gold assay values ranging from 0.03 to 0.06g/t Au (median of 0.05 and average of 0.04g/t Au)


The Abisinia shear hosts significant soluble copper (oxide) mineralization while Abinsina South hosts total copper mineralization (sulphide).

The Company is planning additional detailed mapping and trenching in this area and based on favourable results, a diamond-drilling program to test the continuity of copper and gold mineralization at depth and to determine the true widths of the mineralized shears will be carried out.

A complete list of assays are available in the Appendix hereto or at the Company’s website www.globalhunter.ca


Vino Fino
Vino Fino shear is located approximately 5 kilometres east of Las Posadas and follows a similar direction with a strike of between 020˚ and 050˚. Vino Fino has been traced for over 6 kilometres on surface and a total of 43 samples were collected in the recent program from an area covering nearly 5.6 kilometres of strike length.

The 43 samples returned:

- Soluble copper assays ranged from 0.00 to 7.19% soluble Cu (median 0.77 and average 0.97% Cu Sol)
- Gold assay values ranging from 0.00 to 0.48g/t Au (median of 0.04 and average of 0.08g/t Au)
- Total copper assays ranged from 0.01 to 8.39% total Cu (median 0.95 and average 1.20% Cu T)


Significant soluble copper (oxide) mineralization has been traced for over 5.6 kilometres on surface.

The Company is planning a diamond-drilling program to test the continuity of oxide copper mineralization at depth and to determine the true widths of the mineralized shears.

A complete list of assays are available in the Appendix hereto or at the Company’s website www.globalhunter.ca


La Varilla
La Varilla shear runs parallel to and is located about 1 kilometre east of Vino Fino and shares similar characteristics and has been traced for over 4 kilometres on surface.


A total of 10 rock chip samples were collected along a strike length of over 1,600 metres along La Varilla.

- Soluble copper assays ranged from 0.42 to 2.48% soluble Cu (median 0.80 and average 1.12% Cu Sol)
- Gold assay values ranged from 0.01 to 1.11g/t Au (median of 0.03 and average 0.17g/t Au)
- Total copper assays ranged from 0.54 to 2.85% total Cu (median 0.95 and average 1.27% Cu T)


The surface sampling demonstrates that excellent soluble copper (oxide) values are present within La Varilla shear and the results have been traced for over 1,600 metres on surface.


The Company plans to follow-up the surface sampling with diamond drilling to test the continuity of oxide copper mineralization at depth and to determine the true widths and grades of the mineralized shears.


A complete list of assays are available in the Appendix hereto or at the Company’s website www.globalhunter.ca


“We are extremely excited by the results of the surface sampling program as it verifies the quality of the other shear zones as targets to host significant additional copper oxide mineralization” said Rod Husband President of Global Hunter Corp. “We look forward to testing the extent of the copper oxide mineralization and in some cases the gold mineralization present within these targets.”


Sampling and Assay procedures

A total of 205 samples were collected by a geologist and three field assistants under the supervision of Joaquin Merino, P Geol (a Qualified Person). The samples are rock ship samples from outcrops and or small pits and small underground mines.


The samples were assayed in ALS lab, in La Serena. The samples were stored securely in shipping containers, and then shipped directly to the lab. All the samples were assayed for total copper (Cu T), soluble copper (Cu Sol.), gold (Au) and silver (Ag). The sample locations were captured by a GPS for plotting on base maps.


For detailed sample location and assay maps please visit www.globalhunter.ca


Global Hunter’s principal project is the La Corona de Cobre property, located 70 km north of La Serena, Chile, along the Pan American Highway, within the coastal belt of the Andean Cordillera. In addition to La Corona de Cobre, the Company has its Rabbit South molybdenum project in south-central British Columbia, Canada.


The technical information in this news release has been reviewed by Mr. Rod Husband, a qualified person for the purposes of National Instrument 43-101.


On Behalf of the Board of Directors
GLOBAL HUNTER CORP.
Signed “Rod Husband”
Rod Husband, P.Geo.
President and CEO
Contact: Investor Relations 604-681-4653
Email: [email protected] or visit our Website: www.globalhunter.ca


Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.


This news release may contain forward-looking statements including but not limited to comments regarding the timing and content of upcoming work programs, geological interpretations, receipt of property titles, potential mineral recovery processes, etc. Forward-looking statements address future events and conditions and therefore involve inherent risks and uncertainties. Actual results may differ materially from those currently anticipated in such statements.