Vadzo Launches Bolt-235CGS Global Shutter MIPI CSI-2 Camera

Monday, 08 June 2026 10:00 AM

Topic:

Product Announcements

Vadzo's Bolt-235CGS is a 2.3MP Global Shutter MIPI CSI-2 Camera built on the Onsemi AR0235 HyperLux SG sensor, delivering color global shutter imaging at 1920x1200 with simultaneous full-pixel exposure, low-latency MIPI CSI-2 integration, and broad SoC platform support for factory automation, robotics, AGV, traffic monitoring, and edge AI applications where motion-artifact-free color capture is a hard system requirement. As a compact AR0235 Color Global Shutter MIPI Camera in Vadzo's MIPI CSI-2 camera series, it delivers deterministic shutter timing and high per-pixel sensitivity directly to the host SoC ISP, without USB or network overhead.

FORT WORTH, TX / ACCESS Newswire / June 8, 2026 / Vadzo Imaging, a provider of embedded vision camera products, today announces the launch of the Bolt-235CGS, a 2.3MP Global Shutter MIPI CSI-2 Camera purpose-built for OEM teams who need geometrically accurate color frames in a compact board-level MIPI form factor. As a Global Shutter MIPI CSI-2 Camera in Vadzo's MIPI CSI-2 camera series, the Bolt-235CGS delivers 1920x1200 color output with full-pixel simultaneous exposure and connecting directly to embedded AI SoCs via 2-lane MIPI CSI-2 without USB enumeration overhead or network latency.

Sensor and Camera Overview

The Bolt-235CGS integrates the Onsemi AR0235 HyperLux SG, a 1/2.8" CMOS global shutter sensor with 2.8 µm x 2.8 µm pixel pitch, a maximum resolution of 2.3MP (1920x1200), and a full-resolution frame rate of up to 60fps. As an AR0235 Color MIPI CSI-2 Camera, the Bolt-235CGS captures all pixels simultaneously in a single unified exposure cycle, eliminating the rolling shutter distortion that corrupts imaging of fast-moving parts, rotating machinery, and high-speed production lines. The HyperLux SG architecture targets sub-2e read noise and greater than 70dB dynamic range, delivering measurably higher quantum efficiency and improved low-light sensitivity compared to previous-generation global shutter configurations, making this Global Shutter MIPI CSI-2 Camera a direct upgrade path for OEM teams who need color accuracy, low-noise readout, and motion-artifact-free capture in the same device.

The Bolt-235CGS Global Shutter MIPI CSI-2 Camera connects via 2-lane MIPI CSI-2 directly to the host SoC ISP, supporting 1080p AR0235 MIPI CSI-2 Camera output and full 1920x1200 color global shutter output at up to 60fps. This OEM MIPI camera accepts standard S-Mount (M12) optics, operates across -30⁰C to +85⁰C, and integrates with NVIDIA Jetson and Raspberry Pi platforms through V4L2 driver integration. Module-level power draw suits UAV payload constraints and battery-powered AGV platforms where sensor power budget directly affects system runtime. Vadzo provides module-level drivers for Raspberry Pi 4, Raspberry Pi 5, Jetson Orin NX, Jetson Orin Nano, Jetson Orin AGX, and NXP i.MX8M Plus. Driver porting support for NXP i.MX, STM, and MediaTek platforms are available on request.

Key Capabilities of the Bolt-235CGS: 2.3MP Color Global Shutter MIPI CSI-2 Camera

Global Shutter for Motion-Free Color Capture in High-Speed Environments: Rolling shutter sensors read out pixel rows sequentially, producing geometric distortion in any scene where the subject or camera moves during readout, a failure mode that appears on factory production lines, AGV navigation paths, robotic joints, and traffic monitoring infrastructure. As a Global Shutter MIPI CSI-2 Camera, the Bolt-235CGS exposes all 2.3MP pixels simultaneously in a single unified exposure cycle, delivering geometrically accurate color frames regardless of object velocity or camera motion. For OEM teams integrating vision into systems where part movement, vibration, or vehicle motion is unavoidable, this AR0235 Global Shutter MIPI Camera eliminates the fundamental source of spatial distortion at the sensor level, not through software correction that adds latency and computational overhead.

HyperLux SG Architecture for Low-Noise HDR Color Imaging: Most color global shutter sensors route charge through a storage node that introduces additional read noise before readout, limiting usable dynamic range in scenes with wide brightness variation. The Onsemi AR0235 HyperLux SG addresses this at the pixel architecture level, delivering lower read noise, higher dynamic range, and improved signal-to-noise ratio compared to conventional global shutter configurations. This low noise global shutter camera performs effectively in mixed-illumination environments that combine bright overhead lighting with shadowed inspection zones in the same frame. For embedded vision engineers evaluating HDR global shutter camera options for factory automation, outdoor traffic monitoring, and warehouse AMR deployments, the HyperLux SG pixel architecture delivers measurable improvement in image quality without additional optical filtering hardware or post-capture HDR compositing latency.

Low-Latency 2-Lane MIPI CSI-2 Interface for Real-Time Embedded Processing: The Bolt-235CGS AR0235 Color MIPI Camera connects directly to the SoC ISP via 2-lane MIPI CSI-2, delivering image data with deterministic, low-latency frame timing. There is no USB enumeration overhead, no network stack, and no host-side driver buffering layer to introduce jitter into the pipeline. For robotics deployments, AGV Robot Camera navigation systems, and edge AI MIPI camera platforms where real-time inference and closed-loop control are non-negotiable system requirements, this low latency global shutter camera delivers consistent frame timing that USB and GigE architectures cannot match at equivalent power budgets. Vadzo provides module-level V4L2 drivers covering NVIDIA Jetson Nano Camera platforms, NVIDIA Jetson Xavier NX Camera configurations, NXP IMX MIPI Camera integrations, and Raspberry Pi MIPI Camera deployments, addressing the majority of embedded Linux MIPI camera platforms used in production edge AI deployments.

Compact Board-Level Form Factor for Space-Constrained OEM Integration: The Bolt-235CGS board-level design integrates directly into OEM PCB layouts without mechanical accommodation. The compact module footprint and low weight make it compatible with UAV payload constraints, Barcode Scanner Camera enclosures, handheld terminal designs where size and mass directly affect system feasibility. The AR0235 S-Mount design accepts a range of M12 lens configurations and field-of-view settings, giving OEM teams full optical flexibility within the same AR0235 Color Global Shutter MIPI CSI-2 Camera platform without board-level changes. The -30⁰C to +85⁰C operating range covers outdoor traffic monitoring installations, industrial embedded camera environments, and autonomous mobility camera deployments where consumer-grade module thermal specifications do not meet operational requirements.

"During platform validation on Jetson Orin NX, the Bolt-235CGS delivered geometrically accurate color frames at 60fps full resolution with no rolling shutter artifacts under high-speed conveyor conditions. That result confirms the HyperLux SG sensor architecture is performing exactly as required. For AGV navigation teams and factory inspection engineers who have spent development cycles trying to correct rolling shutter distortion in software, global shutter at the pixel level is the correct answer. The Bolt-235CGS brings that capability to a compact Global Shutter MIPI CSI-2 Camera with validated V4L2 drivers for Jetson and Raspberry Pi, and an industrial thermal range that holds up in the environments where this AR0235 MIPI CSI-2 Camera platform needs to operate." - Alwin Vincent, Product Manager, Vadzo Imaging.

Target Applications

Factory Automation and Machine Vision: Fast-moving parts, rotating components, and vibrating conveyors all produce rolling shutter artifacts in standard sensors, and those distortions translate directly into false rejects, missed defects, and measurement errors at the system output. As a Factory Automation Camera with color global shutter, the Bolt-235CGS AR0235 MIPI Camera captures geometrically accurate color frames at full line speeds, making defect detection, color-based sorting, dimensional measurement, and OCR on moving subjects reliable without motion blur or geometric distortion. The HyperLux SG architecture delivers the per-pixel sensitivity and dynamic range needed for consistent imaging under the mixed-illumination conditions common on factory floors, where overhead fluorescent lighting, localized inspection lighting, and shadow zones coexist in the same frame. For teams deploying vision on pick-and-place systems, label verification stations, and inline quality control rigs, the direct MIPI CSI-2 interface to Jetson and NXP i.MX8M Plus platforms reduces integration time significantly. This Global Shutter MIPI CSI-2 Camera eliminates the failure mode that degrades entire inspection pipelines at the source, delivering spatial accuracy that production OEM teams can rely on at full line speed.

Robotics, AGV, and Autonomous Mobile Robot Platforms: Low-latency MIPI CSI-2 integration with Jetson Orin platforms enables real-time object detection and navigation for AGV AR0235 MIPI CSI-2 Camera systems, AMR Vision Camera deployments, and Autonomous Mobile Robot Vision Camera platforms operating at speed. Global shutter capture ensures every frame used for inference represents a geometrically accurate scene state, eliminating the positional errors that rolling shutter distortion introduces into obstacle detection and path-planning pipelines. For Barcode Scanner Camera applications in goods-to-person fulfillment systems, simultaneous full-pixel exposure of the AR0235 HyperLux SG ensures that barcodes captured at conveyor speed decode accurately without the blur or skew that rolling shutter sensors introduce at the readout boundary. The compact board-level form factor integrates directly into AGV chassis PCB layouts and AMR sensor head assemblies without mechanical redesign. The -30⁰C to +85⁰C operating range and validated V4L2 drivers for Jetson Orin and Raspberry Pi platforms make the Bolt-235CGS a practical Global Shutter MIPI CSI-2 Camera for production AGV and AMR deployment across enclosed warehouse and outdoor industrial environments.

Traffic Monitoring and Autonomous Mobility: License plate recognition, vehicle classification, and intersection analytics all require geometrically accurate color frames from sensors operating under rapid scene transitions and widely variable illumination conditions. A rolling shutter sensor on a traffic monitoring pole produces distorted frames of passing vehicles, corrupting the spatial data that license plate OCR and vehicle classification models rely on for accurate output. As a Traffic Monitoring Camera with color global shutter, the Bolt-235CGS captures vehicle motion without geometric distortion or color fringing, producing accurate frame inputs for detection algorithms regardless of vehicle speed. For Autonomous Mobility Camera deployments in ADAS validation rigs, smart intersection infrastructure, and fleet telematics platforms, the HyperLux SG architecture delivers low-noise color global shutter output that keeps detection reliable across day and night operating conditions. The wide thermal operating range and direct MIPI CSI-2 interface make this Global Shutter MIPI CSI-2 Camera a practical sensor platform for roadside embedded compute deployments, where outdoor temperature exposure and direct-to-SoC frame delivery are both hard system requirements.

AR/VR and Edge AI Vision Applications: Head-mounted AR VR Vision Camera platforms require sensors that eliminate motion artifacts during head movement, deliver accurate color reproduction for overlay alignment, and integrate with compact SoC architectures at low power budgets. A rolling shutter sensor in a head-mounted display produces warped frames whenever the user turns their head, breaking spatial registration between the real world and virtual overlays and degrading the tracking experience directly at the sensor level. The Bolt-235CGS addresses this challenge with simultaneous full-pixel global shutter exposure that keeps frame geometry consistent regardless of head motion speed or direction. As a high speed MIPI camera with V4L2 support across Jetson and Raspberry Pi platforms, the Bolt-235CGS reduces driver development time for teams building embedded Linux vision systems from the ground up. This AR0235 Global Shutter MIPI CSI-2 Camera delivers the simultaneous full-pixel exposure and color accuracy that AR/VR tracking pipelines and edge AI inference models require for reliable operation in latency-sensitive, motion-intensive deployment environments, with a compact form factor and industrial-grade thermal tolerance that consumer-class sensor modules cannot match.

Frequently Asked Questions

1. What is the best color global shutter MIPI camera for factory automation and high-speed machine vision systems?

At 60fps full-resolution capture, a 1920x1200 Global Shutter MIPI CSI-2 Camera exposes all pixels simultaneously, which means a component moving at conveyor speed produces a geometrically accurate frame every 16.7ms without the row-by-row skew that corrupts dimensional measurement and OCR on rolling shutter sensors.
The Vadzo Bolt-235CGS integrates the Onsemi AR0235 HyperLux SG sensor with sub-2e read noise and greater than 70dB dynamic range, making it an effective AR0235 Color Global Shutter MIPI Camera for mixed-illumination factory floor environments where bright inspection lighting and shadowed zones coexist in the same frame. Vadzo provides validated V4L2 platform drivers for Jetson Orin and Raspberry Pi, reducing integration time for OEM inspection teams. The direct 2-lane MIPI CSI-2 connection to the SoC ISP eliminates USB enumeration overhead from the pipeline entirely.

2. Which color global shutter MIPI CSI-2 camera supports NVIDIA Jetson Orin platforms for edge AI and robotics deployments?

The largest time sink in embedded camera bring-up on Jetson Orin is BSP development and ISP tuning, not the sensor selection itself. The Vadzo Bolt-235CGS eliminates that bottleneck with module-level V4L2 drivers validated for Jetson Orin NX, Jetson Orin Nano, and Jetson Orin AGX, shipping out of the box. The 2-lane MIPI CSI-2 interface connects directly to the Jetson Orin ISP, delivering 2.3MP color global shutter output at 1920x1200 and up to 60fps with no USB enumeration overhead or network stack latency. This Global Shutter MIPI CSI-2 Camera exposes all pixels simultaneously, ensuring every inference frame is spatially accurate regardless of robot arm velocity or AGV navigation speed. Vadzo also supports driver porting for NXP i.MX, STM, and MediaTek platforms on request, making this a flexible foundation for production robotics deployments across multiple SoC ecosystems.

3. What makes a color global shutter MIPI camera the right choice for AGV and AMR navigation systems over rolling shutter options?

An AGV traveling at 1.5 meters per second generates enough platform motion during a single rolling shutter readout cycle to skew a 1920x1200 frame by several pixels at the far edge, and that spatial error propagates directly into the obstacle detection and path-planning pipeline. The Vadzo Bolt-235CGS uses the Onsemi AR0235 HyperLux SG to expose all pixels simultaneously, so every frame this AR0235 Global Shutter MIPI Camera delivers is geometrically consistent regardless of AGV speed, acceleration, or turn rate. The 2-lane MIPI CSI-2 interface connects directly to the host SoC ISP with deterministic frame timing, making it compatible with real-time control loops that USB-based architectures cannot reliably serve. The operating range of minus 30 degrees C to 85 degrees C covers the full thermal envelope of enclosed warehouse and outdoor AGV deployments without requiring supplemental thermal management.

4. How does the AR0235 HyperLux SG architecture improve low-light and dynamic range performance in a 2.3MP color global shutter MIPI camera?

The storage node in a conventional global shutter pixel holds charge between exposure and readout, and that node introduces kTC noise that limits the floor of usable dynamic range. The Onsemi AR0235 HyperLux SG addresses this at the pixel level, targeting sub-2e read noise and greater than 70dB dynamic range, delivering meaningful improvement over conventional AR0235 configurations in scenes where bright highlights and deep shadows coexist. For embedded vision engineers deploying a Global Shutter MIPI CSI-2 Camera in environments that combine direct overhead lighting with unlit inspection zones, this architecture produces accurate color frames across the full scene range without requiring HDR compositing software that adds processing latency. The Vadzo Bolt-235CGS delivers this HDR global shutter camera performance with validated MIPI CSI-2 platform drivers for Jetson and Raspberry Pi, making it a practical option for both evaluation and production OEM deployment.

5. Which SoC platforms support 2.3MP AR0235 color global shutter MIPI CSI-2 camera integration for embedded Linux development?

BSP bring-up and V4L2 driver development consume more OEM engineering hours than any other step in embedded camera integration, and that cost compounds on every platform the product targets. The Vadzo Bolt-235CGS ships with validated module-level V4L2 drivers for Raspberry Pi 4, Raspberry Pi 5, NVIDIA Jetson Orin NX, NVIDIA Jetson Orin Nano, and NVIDIA Jetson Orin AGX out of the box, removing that development burden for the platforms where most embedded Linux MIPI camera deployments land. Vadzo provides driver support for NXP i.MX8M Plus as well, and for OEM teams on NXP i.MX, STM, or MediaTek platforms, Vadzo provides porting support on request. This Global Shutter MIPI CSI-2 Camera connects directly to the SoC ISP via 2-lane MIPI CSI-2, bypassing USB enumeration and network overhead to deliver deterministic low-latency frame timing suited for industrial embedded camera and edge AI production deployments.

Availability and Customization

The Bolt-235CGS AR0235 Color MIPI CSI-2 Camera is available now for evaluation and OEM integration. To request full specifications or an evaluation unit, contact the Vadzo Imaging sales team at [email protected].

Vadzo supports full OEM camera customization across the Bolt-235CGS including form factor modification and board redesigns, firmware development and custom feature integration, lens holder modifications and electro-mechanical lens filter control, NIR and illumination board integration, and full enclosure design in both IP-rated and non-IP-rated configurations. Driver porting support for NXP i.MX, STM, and MediaTek platforms is available on request.

About Vadzo Imaging

Vadzo Imaging develops embedded vision camera products for OEMs and system integrators building production-ready vision systems across industrial automation, robotics, healthcare, and smart infrastructure. The company's MIPI CSI-2 camera series, alongside USB 3.x, GigE, Wi-Fi, and SerDes interface camera products, supports a wide range of embedded deployment architectures. From a 2.3MP Global Shutter MIPI CSI-2 Camera for AGV and factory automation to full-spectrum embedded vision platform support, Vadzo provides end-to-end imaging support including sensor integration, ISP tuning, firmware development, and SDK frameworks to accelerate system deployment. Learn more at www.vadzoimaging.com.

Media Contact

Alwin Vincent
Vadzo Imaging
Email: [email protected]
LinkedIn: Vadzo Imaging
YouTube: Vadzo Imaging
X: Vadzo Imaging

SOURCE: Vadzo Imaging

Vadzo Imaging Launches Bolt-235CGS: 2.3MP Global Shutter MIPI CSI-2 Camera Powered by Onsemi AR0235 HyperLux SG

Product Announcements